The higher the Peugeot Motorcycle windshield of the motorcycle is, the better it is. Although the higher the wind blocking effect will be, the greater the disadvantages it will cause. Therefore, the front windshield need not be too high. It must be suitable.

The front windshield of motorcycle mainly has the following functions

1. Windshield. It is self-evident that the effect of wind prevention is different from whether it has or not. Because of its presence during driving, the position of the driver’s chest can avoid the impact of natural wind.

2. Diversion. The front windshield of the motorcycle also plays a very important role in guiding. It can effectively reduce the driving resistance of the vehicle, improve the handling performance of the vehicle, and make the vehicle drive more stable.

3. Decoration. For example, the “windshield” of this car in the picture above is a decoration function. Its value is to make the current part look less empty. As for its wind resistance effect and diversion ability, there is basically no substantive effect. Since the windshield is not only a windshield, its size must be appropriate in actual use. Otherwise, it will not only affect the aesthetics, but also affect the driving stability of the vehicle. If it is installed too large and too high, there will be some safety hazards.

For example, if it is installed too high, it will block the view, make the driver and passenger feel dazzled, and because the wind area is too large, it will increase the driving resistance of the vehicle, which will not only affect the power but also affect the fuel consumption, and even sometimes cause the vehicle to overturn due to the wind direction, so it is not necessary to install the front windshield of the motorcycle too high, nor too large.

According to the design standard of the original car, the chest can be blocked, and the entire installation angle must be tilted towards the rear of the car, which can reduce the wind resistance and also ensure the most basic wind resistance effect.

In a word, the things added in the later stage of the vehicle must be carried out without affecting the vehicle handling and power performance. If not, it is not necessary to add it, so we must use the added parts reasonably.